Bargraph Meter BL-B51D40 & PL-B101D40

External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than
38 Plug-in Input Signal Conditioners that include:
– AC/DC Current – Pressure – Resistance
– AC/DC Voltage – Process – Temperature
– Load Cell – Prototype – 4 to 20 mA
24 V DC excitation is available to power external transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors such as Load Cells and Pressure Transducers.
A red, 51 or 101 segment high brightness bargraph.
Red 4-digit LED display with a range of 1999 to 9999 (12000 counts).
Front panel LED annunciators provide indication of setpoint status.
Two 10 Amp Form C, and two 5 Amp Form A relays available for PL-B101D40 and two 5 Amp Form A relays for the BL-B51D40.
Auto-sensing AC/DC power supply. For voltages between 85-265 V AC/95-370 V DC (PS1).
Provision to connect an external programming lockout switch.
Provision for external DIM switch to reduce the brightest display setting by 50%.
Automatic intelligent averaging smoothe noisy signals, while providing a fast display response to real level changes.

Three-button front panel programming of;
Decimal point setting.
Digital display and the 101 segment bargraph can be independently scaled.
Bargraph center zero function.
Digital display blanking.
2 or 4 programmable setpoints.
Four-level brightness control of bargraph, digital display, and setpoint LEDs.
Adjustable delay-on-make and delay-on-break time for setpoints 1 and 2.
Relay activation can be selected to occur above (HI) or below (LO) each setpoint.

LEOPARD FAMILY: More than 38 different Plug-in I-Series Input Signal Conditioners are approved for Texmate’s Leopard Family of meters.

Input Specs: Depends on Input signal conditioner
A/D Converter: 14 bit single slope
Accuracy: ±(0.05% of reading + 2 counts)
Temp. Coeff.: 100 ppm/°C (Typical)
Warm up time: 2 minutes
Conversion Rate: 3 to 16 conversions per second
Display: 4 digit 0.31" Red LED display (std).
Polarity: Assumed positive. Displays –ve sign.
Decimals: User programmable
Positive Overrange: Bargraph and top segments of digital display flash.
Negative Overrange: First segment of bargraph and bottom segments of digital display flash.
Display Range: –1999 to 9999 counts - 101 segment digital display 0 to 101 segments on bargraph
Relay Output: Two 5A Form A relays and Two 10A Form C relays.
Power Supply: AC/DC Auto sensing wide range supply 85-265V AC / 95-370V DC@3W
Operating Temp.: 0 to 60°C
Storage Temp: –20°C to 70°C.
Relative Humidity: 95% (non condensing)
Case Dimensions: BL-B51D40 1/16 DIN (Bezel 24Wx96Hmm)
Depth behind bezel (5.22") 132.5 mm
PL-B101D40 3/32 DIN (Bezel 24Wx144H mm)
Depth behind bezel (5.83") 148 mm
Weight: BL-B51D40, 6.5 oz., 8.5 oz when packed. PL-B101D40, 9.5 oz., 12 oz when packed.

Bargraphs

l Home l More Bargraphs l Bargraph Display Colors l PanelMeter.com l Texmate.com l