A red, green or tri-color, 101 segment bargraph, with a 4-digit LED digital display for monitoring, measurement, and control applications, mounted in a 36x144 case.

Complete Data Sheet Download PDF 20 Pages 4.1M In order to read the PDF, you will need Adobe Acrobat Reader. Its FREE!

FL-B101D40 Leopard Bargraphs . . . PRICED FROM $200 to $350

A Smart Tricolor or mono-color digital bargraph with four fully programable set points for monitoring, measurement, and control applications

---

Texmate, an international leader in Bargraphs and digital panel instruments for more than 20 years, introduces a new addition to our Leopard Family of meters. The FL-B101D40 bargraph is the optimal choice to replace switchboard, analog meters, or setpoint-controllers. Texmate’s state-of-the-art, user friendly technology, has produced a cost effective bargraph that is easy to program and calibrate, with more than 30 compatible modular signal conditioners that can be configured for almost any application.

General Features

---

• External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 38 Plug-in Input Signal Conditioners that include:
  – AC/DC Current – Pressure – Resistance
  – AC/DC Voltage – Process – Temperature
  – Load Cell – Prototype – 4 to 20 mA
  
• Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts).
  
• A Programable Tricolor (Red-Green-Orange) or mono color (red or green), 101 segment high brightness bargraph. Optional vertical or horizontal format.
  
• Red 4-digit LED display with a range of -1999 to 9999 (12000 counts). Optional green digital display.
  
• Front panel LED annunciators provide indication of setpoint status.
  
• Two 10 Amp Form C, and two 5 Amp Form A relays available
  
• Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 18-48 V AC / 10-72 V DC (PS2).
  
• 24 V DC excitation is available to power external 4/20mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors.
  
• Provision to connect an external programming lockout switch.
  
• Provision for external DIM switch to reduce the brightest display setting by 50%.
  
• Optional NEMA-4 front cover.
  
• Automatic intelligent averaging, smooths noisy signals while providing a fast display response to real level changes.
  

Software Features

---

• Digital display and the 101 segment bargraph can be independently scaled.
  
• Bargraph center zero function.
  
• Four programmable setpoints.
  
• Adjustable delay-on-make and delay-on-break time for setpoints 1 and 2.
  
• Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  
• Digital display blanking.
  
• Decimal point setting.
  
• Four-level brightness control of bargraph, digital display, and setpoint LEDs.
  

Specifications

---

• Input Specs: Depends on Input signal conditioner
  
• A/D Converter: 14 bit single slope
  
• Accuracy: ±(0.05% of reading + 2 counts)
  
• Temp. Coeff.: 100 ppm/°C (Typical)
  
• Warm up time: 2 minutes
  
• Conversion Rate: 10 conversions per second (Typical)
  
• Digital Display: 4 digit 0.31" LED red (std), green (optn) Range –1999 to 9999 counts.
  
• Bargraph Display: 101 segment 4” red vertical (std), green or tricolor (optn), horizontal (optn)
  
• Polarity: Assumed positive. Displays – negative
  
• Decimal Selection: Front panel button selectable, X•X•X•X•
  
• Positive Overrange: Bargraph and top segments of digital display flash.
  
• Negative Overrange: First segment of bargraph and bottom segments of digital display flash.
  
• Relay Output: Two 5Amp Form A relays and Two 10 Amp Form C relays.
  
• Analog Output: Isolated 16 bit user scalable mA or V OIC (mA out) 4-20 mA @ 0 to 500 ohms max loop resistance OIV (volts out) 0-10 V DC @ 500 ohms or higher resistance
  
• Power Supply: AC/DC Auto sensing wide range supply, PS1 (std) 85-265 VAC / 95-370 VDC @ 2.5W max 4.2W PS2 18-48 VAC / 10-72 VDC @ 2.5W max 4.2W
  
• Operating Temp.: 0 to 60°C
  
• Storage Temp: –20°C to 70°C
  
• Relative Humidity: 95% (non condensing)
  
• Case Dimensions: 9/64 DIN (Bezel 36Wx144Hmm), Depth behind bezel (5.83") 148mm Plus (0.7”) 18mm for connectors
  
• Weight: 9.5 oz., 12 oz when packed
  

Face Plate Scales

---

 

A standard 0 - 100 scaled face plate, as shown is provided with each meter, or blank face plates may be ordered at no charge. Alternatively a customized face plate with special scaling can be ordered. The price for these face plates will depend on the degree of customization, type of logos required, number of colors used and quantity.